Tarmac Laying Contractor in Atherstone

Tarmac Laying Contractors in Atherstone — what to expect

For homeowners across Atherstone, the difference between a driveway that settles and one that stays true for years usually comes down to the preparation beneath the surface. A proper tarmac laying job in the CV9 area starts with a well-compacted MOT Type 1 sub-base, which is then levelled and rolled before the binder course goes down. Most local contractors would agree that an AC 20 binder course, followed by an AC 10 surface course, gives the smoothest, most durable finish for a residential drive, and it is this two-layer approach that prevents the ripples and cracking you sometimes see on cheaper jobs. If you already have an existing asphalt surface that has seen better days, a plane and overlay can be a more cost-effective route than digging out the whole base, provided the old layer is still sound and a tack coat is applied to bond the new material properly. Edge restraint kerbs are another detail worth thinking about, as they keep the tarmac from feathering at the borders, and if you are extending onto the road, you will need to sort out dropped kerbs through the council first. For paths and private roads, the same principles apply, but the surface course can be adjusted to suit lighter traffic, and some people prefer a tar and chip finish for a bit more texture. Driveway drainage is also part of the conversation, especially in Warwickshire where autumn can be wet, so a slight fall towards a gully or channel is worth planning in from the start. Once you have a rough idea of what your project involves, it is simply a matter of getting two or three local firms to come out and measure up, so you can compare quotes with confidence.